1.How to set up l10 prime for a different floor. 2. I am not able to operate the device remotely i. E when i am not at my home

1.How to set up l10 prime for a different floor vaccum only while the dock is on a different floor
2. I am not able to operate the device remotely i.e when i am not at my home

Hi, you can follow these steps -
1. One time mapping with the dock station would be required. Once that is done, you can select "vacuum only" cleaning mode in the App OR manually remove the mop plates, so that robot operates in vacuum mode by default.
Put it on the other floor and give cleaning command.

2. You may not be able to do that because your wifi signal of ground floor is not reaching the first floor. Either you'll need to setup another router with same name and same password, so that robot switches to the router on the first floor. OR you can press the button on the robot for it to do full map cleaning (not remotely possible)